Reliable detection
The Secoris wireless motion detector FUBW60100 detects people within its detection range based on their moving body heat field. For this, he uses a Passive infrared (PIR) sensor. Unauthorized access is immediately reported to the Intrusion alarm system triggered. If required, the detector can be set to pet-immune. to be provided to register pets under a defined size (weight class) to ignore and avoid false alarms.

Safe and reliable: close monitoring
With an opening angle of approximately 90 degrees and a detection range of A single wireless motion detector can monitor even large areas up to 10 meters away. Spaces almost completely. The spherical lens design provides, thanks to Uniform room coverage ensures extremely reliable detection. Thanks to With integrated creep zone protection, the detector has no blind spots and It also detects people directly below it.

Secure connection, long range
The Secoris wireless motion detector is paired via the BUS wireless extension (BUMO60030). The connection is established by a secure, highly encrypted radio communication method protected against manipulation by Third parties are protected. The transmission is AES128 encrypted. (Security level as in online banking) and against so-called Protected against replay attacks. The detector offers a long wireless range. of over 700 m (open field).

Efficient and low-maintenance
The passive detector has very low power consumption and a battery life of up to 5 years.

Correct installation
Optimal The mounting location is on the wall or in a corner, approximately 1.80 to 2.40 m above ground level. the ground. The expected direction of an intruder's movement should be perpendicular. to the detector. The viewing angle is approximately 90°, the Detection range (depending on mounting height) up to 10 x 10 m.

Product benefits:

• Wireless PIR motion detector for indoor use
• Detects humans and animals based on their body heat and Heat movement via passive infrared sensors (animal immune: suppression of (Adjustable for pets)
• Efficient room monitoring: Detection range approx. 10 x 10 m; Approximately 90° opening angle for corner installation
• Walking test and pet immunity at the Secoris headquarters Configurable radio mode. In Secvest radio mode, directly on the detector.
• High security: uniform room coverage, Creep protection and sabotage monitoring (lid and wall tear-off contact)
• Pre-drilled holes for easy corner or wall mounting (wireless)
• Compatible with Secoris radio module BUMO60030 and Secvest (FUAA50000, FUA50500 and higher)
• Wireless connection in Secoris radio mode AES128 encrypted and Replay-protected
• Firmware OTA updateable (over-the-air remote maintenance)

• Color: white
• EN: Grade 2
• Standard: EN 50131-2-2:2008, EN 50131-5-3:2017, EN 50131-6:2008/A1:2014
• Dimensions (WxHxD): 55x115x55 mm
• Battery type: 1.5V AA (LR6)
• Detection method: Heat detection
• Detection range of detector: approx. 10 m
• Radio frequency: 868 MHz
• Compatible with: Secoris, Secvest
  
• Radio power: 10 mW
• Housing material: ABS
• Battery - Quantity: 2
• Battery - max. battery life: 2 years
• Maximum operating temperature: -10 °C to +55 °C
• Maximum humidity: 75%
• Maximum range receive/transmit (open field): 700 m
• Modulation: FM
• Mounting location: Wall
• Net weight: 0.148 kg
• Sabotage monitoring: Yes
• Protection class: IP 34
• Sensor type: PIR
• Security level: 2
• Voltage monitoring: Yes
• DC power supply: 3 V
• Animal immunity: No
• Environmental class: II
• Certifications: EN 50131 Grade 2

• 1x Secoris wireless motion detector
• 1x Quick Guide
• 2x 1.5V AA (LR6) batteries