DETECTS GLASS BREAKAGE BY SOUND - Simply efficient: monitors entire rooms
The The Secoris FUGB60000 acoustic wireless glass break detector recognizes the sound of breaking glass. glass panes (window pane, glass door, etc.) and reports the glass breakage to the Secoris or Secvest wireless alarm system. The acoustic sensor of the glass break detector monitors the entire room (up to a range of 9 m).

2-stage detection: False alarms virtually eliminated.
The The sensor detects the specific tonal components of clinking glass (low- and high-frequency components) in two stages: First the noise of the the actual breaking of the glass, then the sound of the shards hitting the glass the ground. Only if both criteria are met does the Glass breakage detectors trigger an alarm. This minimizes the risk of false alarms.

Optimal installation, reliable room monitoring
The The FUGB60000 should be pointed directly at the window area to be monitored. The best position is approximately 2-3 meters away from the Glass front, maximum distance is 9 meters. Technical notes: Each after background noise from the immediate vicinity and depending on “Window environment” (curtains, flowers, interior shutters, (e.g., burglar-resistant glass) can reduce the detection range of the detector. They vary. It is not recommended to install the detector in rooms with carpeted floors. to use, as the carpet absorbs the "impact of the shards" on the floor can dampen acoustically.

Secure wireless connection
The FUGB60000 wireless glass break detector is integrated into the ABUS burglar alarm system via the Secoris BUS wireless extension (BUMO60030). (EMA) programmed. The connection is established via a secure radio protocol. protected from manipulation by third parties.

Product benefits:

• Glass breakage detectors recognize the specific sound breaking glass panes
• Monitors a window or an entire window front in the room (without being placed directly on the disc)
• Alarm LED to indicate the radio signal strength on the device (can (can be deactivated in Secoris radio mode)
• Device identification: from the alarm control panel, the LED on the Trigger alarm
• Sabotage monitoring (lid and wall breakage contact)
• Firmware OTA updateable (over-the-air remote maintenance)
• Compatible with Secoris (BUMO60030) and Secvest (FUAA50xxx)
• Wireless connection in Secoris radio mode AES128 encrypted and Replay-protected
• Compliant with EN 50131

• Environmental class: I
• Safety grade: 2 EN50131-3
• Maximum range receive/transmit (open field): 700 m
• Sensor type: Microphone sensor
• Voltage monitoring: Yes
• Status indicator: Yes
• Current consumption: 24 mA
• Compatible with: Secoris, Secvest
• Detection range: up to approx. 6 m
• Operating temperature: -10°C to +55°C
• Humidity: <85% Relative humidity
• Dimensions: 80 x 108 x 43 mm (H x W x D)
• Weight: 140 g
• RF immunity: 10 V/m
• Power supply: 3.0 V DC, Li-ion battery type CR2
• Error message: "empty battery" <2.4 V
• Frequency: 868.09 MHz
• RF transmit power: 10 mW (antenna input)
• Sabotage monitored: yes
• Supervision: every 4 minutes
• Housing material: white ABS
• Distribution: ABUS Security Tech

• 1x Secoris wireless glass break detector
• 1x battery 3V CR2 Li (FU2990)