Product information
TRANSMITS STRONG RADIO SIGNALS
The ABUS Secoris wireless repeater FUMO60010 is used when the
Radio range of one or more radio components to the Secoris
Wireless extension is insufficient.
Optimal wireless range throughout the entire building
The repeater increases the range of Secoris wireless components to the Secoris
Wireless range extension. Up to 10 wireless components can be integrated per wireless repeater.
Each wireless extension requires 2 repeaters, allowing a maximum of 20 wireless components per extension.
Secoris alarm system (EMA).
Configure easily, install simply
The radio components to be amplified are manually selected in the menu of the
Radio extension selected and then automatically transmitted to the repeater.
The radio repeater is powered by a 12V power supply and is in the
Emergency power backup in case of a power outage.
Expansion module for the Secoris burglar alarm system
The FUMO60010 is wirelessly integrated into the system via the BUMO60030 BUS radio extension.
Secoris intrusion alarm control panel integrated. It supports secure Secoris.
Radio protocol, therefore the transmission is AES128 encrypted (security level
as in online banking) and protected against so-called replay attacks.
Product benefits:
- Additional module for increasing range and signal amplification from Secoris wireless components
- Enables good wireless connectivity throughout the entire building
- Opens up rooms, building sections and outdoor areas for radio communication, which due to the great distance to the Secoris radio extension or shielding The building structure would otherwise be unsuitable
- Amplifies the signal for up to 10 Secoris wireless components.
- Automatic transmission of the configured Wireless components connected to the repeater
- Colored LEDs for status indication and signal strength indication (Reach)
- Wireless connection in Secoris radio mode AES128 encrypted and Replay-protected
- Firmware OTA updateable (over-the-air remote maintenance)
- EN 50131 Grade 2 certified
- Dimensions (HxWxD): 155x130x42 mm
- Display: 3 LEDs
- Batteries: 2 x 1.5V AA alkaline batteries
- Operating temperature: -10 °C to +55 °C
- Inputs: Power supply, USB
- Recommended power supply: AZZU10011 (not included)
- Remote access: Signal strength of components via radio
- Wireless alarm bandwidth: 20 kHz
- Radio frequency: 868.6625 MHz
- Radio power: 10 mW
- Housing material: ABS
- Communication: Radio
- Compatible with: Secvest, Secoris
- Maximum humidity: 94%
- Maximum emergency power runtime: 25 hours
- Maximum range receive/transmit (open field): 500 m
- Maximum range receive/transmit (indoors): 30 m
- Modulation: FM
- Installation location: Assembly
- LAN network connection: No
- Emergency power supply: Yes
- Sabotage monitoring: Yes
- Protection rating: IP34
- Security level: 2
- Fuse: Yes
- Software version: 1_2
- Voltage monitoring: Yes
- Power supply DC: 12 V
- Language instructions: DE, EN, FR, NL, DK, IT
- OSD language: DE, EN, FR, NL, DK, IT
- Current consumption: 50 mA
- Transmission method: Radio
- Environmental class: II
- 1x Wireless Repeater
- 2x batteries
- 1x Installation instructions
- 3x screw, dowel
- 2x Cover housing screws
TRANSMITS STRONG RADIO SIGNALS
The ABUS Secoris wireless repeater FUMO60010 is used when the
Radio range of one or more radio components to the Secoris
Wireless extension is insufficient.
Optimal wireless range throughout the entire building
The repeater increases the range of Secoris wireless components to the Secoris
Wireless range extension. Up to 10 wireless components can be integrated per wireless repeater.
Each wireless extension requires 2 repeaters, allowing a maximum of 20 wireless components per extension.
Secoris alarm system (EMA).
Configure easily, install simply
The radio components to be amplified are manually selected in the menu of the
Radio extension selected and then automatically transmitted to the repeater.
The radio repeater is powered by a 12V power supply and is in the
Emergency power backup in case of a power outage.
Expansion module for the Secoris burglar alarm system
The FUMO60010 is wirelessly integrated into the system via the BUMO60030 BUS radio extension.
Secoris intrusion alarm control panel integrated. It supports secure Secoris.
Radio protocol, therefore the transmission is AES128 encrypted (security level
as in online banking) and protected against so-called replay attacks.
Product benefits:
- Additional module for increasing range and signal amplification from Secoris wireless components
- Enables good wireless connectivity throughout the entire building
- Opens up rooms, building sections and outdoor areas for radio communication, which due to the great distance to the Secoris radio extension or shielding The building structure would otherwise be unsuitable
- Amplifies the signal for up to 10 Secoris wireless components.
- Automatic transmission of the configured Wireless components connected to the repeater
- Colored LEDs for status indication and signal strength indication (Reach)
- Wireless connection in Secoris radio mode AES128 encrypted and Replay-protected
- Firmware OTA updateable (over-the-air remote maintenance)
- EN 50131 Grade 2 certified
- Dimensions (HxWxD): 155x130x42 mm
- Display: 3 LEDs
- Batteries: 2 x 1.5V AA alkaline batteries
- Operating temperature: -10 °C to +55 °C
- Inputs: Power supply, USB
- Recommended power supply: AZZU10011 (not included)
- Remote access: Signal strength of components via radio
- Wireless alarm bandwidth: 20 kHz
- Radio frequency: 868.6625 MHz
- Radio power: 10 mW
- Housing material: ABS
- Communication: Radio
- Compatible with: Secvest, Secoris
- Maximum humidity: 94%
- Maximum emergency power runtime: 25 hours
- Maximum range receive/transmit (open field): 500 m
- Maximum range receive/transmit (indoors): 30 m
- Modulation: FM
- Installation location: Assembly
- LAN network connection: No
- Emergency power supply: Yes
- Sabotage monitoring: Yes
- Protection rating: IP34
- Security level: 2
- Fuse: Yes
- Software version: 1_2
- Voltage monitoring: Yes
- Power supply DC: 12 V
- Language instructions: DE, EN, FR, NL, DK, IT
- OSD language: DE, EN, FR, NL, DK, IT
- Current consumption: 50 mA
- Transmission method: Radio
- Environmental class: II
- 1x Wireless Repeater
- 2x batteries
- 1x Installation instructions
- 3x screw, dowel
- 2x Cover housing screws
ABUS Secoris - radio repeater FUMO60010
Couldn't load pickup availability
SKU: Product number: FUMO60010
Invoice without VAT
Business customers from Germany and other EU countries (excluding Austria) can have their goods invoiced without VAT. Simply provide your valid VAT identification number during the ordering process.
Order with VAT identification number
The easiest way to enter your VAT ID number is during the customer account creation process: Click here

Alternatively, you can access the shopping cart during the ordering process (either on the side or directly on the shopping cart page). There, enter your valid VAT identification number in the "VAT ID" field; this will automatically process your order tax-free.

Special conditions for large orders
Please contact us for large orders. We will promptly provide you with a customized offer with special conditions.
