Alarm messages via mobile network
The ESMO60000 mobile communication module with voice support is An add-on module for the Secoris burglar alarm system. It is not network-enabled. (Ethernet/LAN/Internet) available locally, the module uses the mobile network as a wireless transmission path. It has two operating modes: the data mode for access to the Secoris central office and the mobile network mode for sending Alarm messages from headquarters. 

Wireless transmission via mobile network
The ESMO60000 is used to set up a second, redundant transmission path to ensure full availability in case of a network failure To ensure alarm functionality and access to the Secoris control center. If the network fails, the system automatically switches to mobile network. Generally speaking This also allows for the use of objects without an Ethernet connection (remote warehouse, Holiday homes, etc.) should be optimally secured with alarms. 

Data mode
To establish the mobile connection between Secoris and ABUS Cloud Portal: for accessing and operating the central system via Web interface and app. An emergency call and service center (NSL) can also be used. be connected.

Mobile mode
In case of alarm, it sends voice messages or digital messages. Control center protocols (SIA IP, DC-09), as well as push notifications to the Secoris App or text messages (SMS). 

Installation and programming
The module is mounted directly onto the circuit board of the Secoris control unit. It is plugged in. It has an integrated microphone for recording voice messages. to speak. Connecting the included external antenna ensures a secure and stable wireless connection. Setup and programming of the Modules are accessible via web interface, Secoris app and on the control panel (Keyboard) possible.

Required accessories: Data SIM card or micro SIM card (4G/3G/2G)

Product benefits:

• Additional module for the Secoris alarm control panel for alternative use or redundant communication (2 operating modes)
  
• Bidirectional data transmission and communication via Mobile communications: originating from or incoming to the Secoris EMA (alarm messages). (Access to central office)
• Data mode: Setting up the mobile network connection from the Central connection to the ABUS Cloud Portal or an emergency call and service center (NSL), programming via web interface, app and control panel
• Secure transmission in case of network failure or building closure without Ethernet connection
• Mobile network mode: Sending voice messages (GSM/VoLTE, (recorded with microphone), control center protocols (NSL: SIA IP, DC-09), Push notifications (Secoris app) and SMS
• Wireless standard: 4G (LTE), fallback to 3G (UMTS) / 2G (GSM)
• Automatic switching from Ethernet to mobile network (4G/3G/2G data connection) in case of network failure
• The module (including microphone) is mounted directly onto the circuit board of the Secoris headquarters plugged in
• An external antenna for optimal radio transmission is included. It is plugged directly into the module.

• System requirements: Secoris Software >=2.01.00
• Dimensions (L x W x D): 63 x 40 x 12 mm
• Connectors: MMCX 50 Ohm
• Gross weight: 124 g
• Maximum humidity: 93%
• Environmental class II
• Communication: Micro SIM (3FF) 1.8V / 3.0V, 15 x 12 mm
• Radio performance 4G LTE: 2100MHz (B1), 1800MHz (B3), 2600MHz (B7), 900MHz (B8), 800MHz (B20), 700MHz (B28); 316mW
• Radio performance 3G UMTS: 2100MHz (B1), 900MHz (B8); 316mW
• Radio power 2G: GSM/GPRS/EDGE: 900MHz, 2W & 1800MHz, 1W
• Operating temperature: -10 to +55 °C

• 1x mobile communication module
• 1x mobile phone antenna (approx. 300 cm cable length)
• 1x Quick Guide
• 1x Mounting material