Reliable detection
The Secvest wireless motion detector FUBW60100 (replaces FUBW50100 and FUBW50110) detects people within its detection range based on their moving body heat field. It uses a passive infrared (PIR) sensor for this purpose. Unauthorized entry is reported directly to the burglar alarm system. If required, the detector can be set to pet-immune mode to ignore pets below a defined size (weight class) and prevent false alarms.

Safe and reliable: close monitoring
With a detection angle of approximately 90 degrees and a range of up to 10 meters, a single wireless motion detector can monitor even large rooms almost completely. The spherical lens design ensures extremely reliable detection thanks to uniform room coverage. Thanks to integrated creep zone protection, the detector has no blind spots and can even detect people directly below it.

Secure connection, long range
The Secoris wireless motion detector is paired via the BUS wireless extension (BUMO60030). The connection is protected against manipulation by third parties through a secure, highly encrypted wireless protocol. Transmission is AES128 encrypted (security level comparable to online banking) and protected against replay attacks. The detector offers a long wireless range of over 700 m (open field).

Efficient and low-maintenance
The passive detector has very low power consumption and a battery life of up to 5 years.

Correct installation
The optimal mounting location is on the wall or in a corner, approximately 1.80 to 2.40 m above the floor. The expected direction of an intruder's movement should be perpendicular to the detector. The viewing angle is approximately 90°, and the detection range (depending on the mounting height) is up to 10 x 10 m.

Product benefits:

• Wireless PIR motion detector for indoor use
• Detects humans and animals based on their body heat and heat movement using passive infrared sensors (pet immunity: pets can be blocked)
• Efficient room monitoring: Detection range approx. 10 x 10 m; approx. 90° opening angle for corner installation
• Walk test and pet immunity can be configured at the control panel in Secoris wireless mode. In Secvest wireless mode, directly at the detector.
• High security: uniform room coverage, crawl-under protection and tamper monitoring (lid and wall tear-off contact)
• Pre-drilled holes for easy corner or wall mounting (wireless)
• Compatible with Secoris radio module BUMO60030 and Secvest (FUAA50000, FUA50500 and higher)
• Wireless connection in Secoris wireless mode, AES128 encrypted and replay protected
• Firmware OTA updateable (over-the-air remote maintenance)