communication

• Jeweller Communication Technology

Proprietary radio technology for transmitting commands, alarms, and events.

• • Radio frequency bands: 866.0-866.5 MHz 868.0-868.6 MHz 868.7-869.2 MHz 905.0-926.5 MHz 915.85-926.5 MHz 921.0-922.0 MHz
  • Maximum effective radiated power (ERP): up to 20 mW
  • Radio signal modulation: GFSK
  • Radio range: up to 1700 m

Between the device and a control and display unit (CIE) or a radio signal amplifier in free space.

• Wings communication technology

Proprietary wireless communication technology for uploading firmware updates.

• • Frequency Bands: 866.0-866.5MHz 868.0-868.6MHz 868.7-869.2MHz 905.0-926.5MHz 915.85-926.5MHz 921.0-922.0MHz
  • Radio range: up to 1700 m

Between the detector and a hub control unit (or a radio signal amplifier) ​​in an open field.

recognition

• Sensor elements
  • 1 × PIR sensor
  • 1 × K-band microwave sensor

K-band microwave sensor to prevent false alarms caused by thermal disturbances.

Operating frequency: 24 GHz.

• Motion detection range: up to 5 m
  

When installed at a height of 1 m.

• Angle of motion detection:
  • horizontal: 15°
  • vertical: 100°
• Motion detection speed: 0.3 to 2.0 m/s

The detector lens must be aligned perpendicular to the intended penetration path into the object.

• Sensitivity: 3 levels

Adjustable by PRO users or users with administrator rights in the Ajax app.

• Pet immunity:
  • Height: up to 70 cm
  • Weight: not relevant

The detector must be installed at a height of 1 meter, and the slider on its housing must be set to the pet position.

• Protection against false alarms: dual motion detection technology SmartDetect
• Temperature compensation: Effective motion detection at temperatures from −25 °C to +60 °C.

-------------------------

Recommendations

The recommended installation height of the device is up to 5 m on the ceiling and 1 m on the side wall, depending on the size of the protected area.

The device is suitable for indoor and outdoor use.

-------------------------

Sabotage protection

• Tamper alarm: Notifications are sent when attempts are made to remove the detector from the surface or mounting plate.
• Cover monitoring system: Detects attempts to block the detector's field of view
• Accelerometer: Alarm sounds when the detector is moved.

Must be activated if the detector is mounted with a bracket from another manufacturer.

• Protection against device spoofing: Device authentication
• Detection of connection loss: after 36 seconds

The detection time depends on the jeweler's settings.

power supply

• Battery: 2 × CR123A (Pre-installed)
• Type: Type C
• Estimated battery life: up to 3 years
• Operating voltage of the detector: 4.1–6.2 V
• Rated operating voltage of the detector: 6 V⎓
• Quiescent current consumption of the detector at nominal voltage: 30 μA
• Maximum current consumption of the detector at nominal voltage: 600 mA
• Full battery capacity: 1600 mAh
• Low battery voltage: 4.48 V⎓
• Recovery voltage at low battery charge: 5.14 V
• Battery voltage at the end of its service life: 4.1 V

The device is switched off.

• Battery capacity at the end of its lifespan: 170 mAh

Housing

• Dimensions of the detector: 45 × 32 × 43 mm
• Dimensions of the detector with mounting bracket: 145 × 44 × 54 mm
• Weight of the detector: 130 g
• Weight of the mounting bracket: 20 g
• Operating temperature: from -25 °C to +60 °C
• Operating humidity: up to 95%
• Protection rating: IP55
• Color: White