capacity

• Devices: up to 200

Ajax supports EN54 product line devices, wireless intrusion alarm devices and resettable manual fire alarm activation buttons in any combination, except for the following:

• • up to 10 burglar sirens;
  • up to 50 control units with built-in signal transmitter;
  • up to 5 EN54 Fire ReX Jeweller wireless signal boosters.

• Fire zones: up to 40

Fire warnings in separate zones. Each zone can include multiple rooms.

• Ajax NVRs: up to 36
• Ajax cameras: up to 224 via Ajax NVR and up to 492 as a standalone unit
• Third-party IP cameras: up to 10 when using RTSP via SDK, up to 224 when using ONVIF via Ajax NVRs
• Users: up to 200
• Automation scenarios: up to 64
• Rooms: up to 80
• Security groups: up to 25
• Event log: up to 5000 events

Fire alarm system events. Can be displayed on the CIE screen. Events are stored in non-volatile internal flash memory.

• up to 500 events

Fire alarm, burglary, and other system events. Can be viewed in the event log in the Ajax apps.

communication

• Jeweller communication technology:
  • Frequency Bands: 866.0-866.5 MHz868.0-868.6 MHz868.7-869.2 MHz905.0-926.5 MHz915.85-926.5 MHz921.0-922.0 MHz
  • Maximum effective radiated power (ERP): up to 20 mW
  • Radio signal modulation: GFSK
  • Radio range: up to 1800 mW

• Wings communication technology
  • Frequency Bands: 866.0-866.5 MHz868.0-868.6 MHz868.7-869.2 MHz905.0-926.5 MHz915.85-926.5 MHz921.0-922.0 MHz
  • Radio range: up to 1800 m

Communication channels

• Ethernet: 1x 8P8C connector (Up to 100 Mbit/s.)
• Mobile communications: 2 slots for micro-SIM
• Mobile frequencies: 2G, GSM900/DCS1800 (B3/B8), 4G (LTE), FDD B1/B3/B5/B7/B8/B20
• WLAN: Module 802.11 b/g/n (up to 72 Mbit/s.)

Prioritization of communication channels:

1. Ethernet
2. WLAN
3. Mobile phone connection

The communication channels operate in parallel to increase the system's reliability. The majority of the data is transmitted via Ethernet.

Notifications

• Supported notification types: Push notifications, SMS, calls
  

surveillance

• Supported protocols: SIA (DC-09), SurGard (Contact ID)

Photo verification:

• Types of photo verification
  • Photo taken after alarm
  • Photo after scenario
  • Photo available upon request
  • Photo according to schedule
  • Photo taken while focusing/blurring

• Image transmission time: up to 9 seconds
• Photo resolution: up to 960 × 720 pixels
• Number of photos in a series: from 1 to 5 images
  

Screen

• Screen diagonal 10.1″
• Matrix type: IPS
• Resolution: 1024 × 600 px
• Sensor: capacitive

Exits

• Exit 1:

Relay output for alerting the monitoring company in case of a system error. The contact state is normally closed (NC) by default.

• Exit 2:

Relay output for alerting the monitoring company in case of a fire alarm. The contact state is normally open (NO) by default.

• Operating mode: bistable
• Mains connection: 10–30 V⎓
• Energy consumption: up to 60 W

In standby mode.

• Maximum resistive load: up to 2 A at 30 V
• Maximum inductive/capacitive load: up to 2 A at 30 V

Installation recommendations: The device is suitable for indoor use only.

Use GlandBox when power and signal cables are not installed in the wall.

The operating voltage of the device is 110–240 V~.

Sabotage protection

• Detection of connection loss: after 36 seconds
  

power supply

• External: 110–240 V, 50/60 Hz - up to 0.48 A power consumption.
• Internal: 7.4 V⎓, 5 Ah/10 Ah

With an emergency power battery for fire alarm system and repeater, which is not included in the scope of delivery: EN54 Internal Battery (24h) or EN54 Internal Battery (72h).

Housing

• Dimensions: 263 × 223 × 54 mm
• Weight: 1526 g
• Operating temperature: from -10 °C to +40 °C
• Operating humidity: up to 75% non-condensing
• Protection rating: IP20
• Flammability class: UL 94 V-0
• Color: Black, White