communication

• Jeweller Communication Technology

Proprietary radio technology for transmitting commands, alarms, and events.

• • Radio frequency bands: 866.0-866.5 MHz 868.0-868.6 MHz 868.7-869.2 MHz 905.0-926.5 MHz 915.85-926.5 MHz 921.0-922.0 MHz
  • Maximum effective radiated power (ERP): up to 20 mW
  • Radio signal modulation: GFSK
  • Radio range: up to 1700 m

Between the device and a control and display unit (CIE) or a radio signal amplifier in free space.

Entrances

• Number of inputs for third-party devices: 2
• Input terminals
  • Input 1, Input 2 — Inputs for connecting wired third-party devices.
  • Shield — common input for connecting the shielding of cables that connect third-party wired devices.
• Connection type: NO, NC, EOL, 2EOL, 3EOL
• EOL resistor: 0.47 kΩ, 1.2 kΩ, 2.7 kΩ and 6.2 kΩ resistors

Four resistors for each input are included in the package.

• Length of wired connection to third-party devices: up to 100 m

When using 2×1.5 mm² (16 AWG) fire-resistant cable.

• Cable cross-sectional area: 0.4-2.5 mm² (21-13 AWG)

Exits

• Number of outputs for third-party devices: 2
• Output terminals
  • Output 1, Output 2 — Relay outputs for connecting wired third-party devices.
• AC operating range: 10–250 V~, 5 mA to 10 A (resistive load)
• DC operating range: 10–30 V, 5 mA to 5 A (resistive load)
• Cable cross-sectional area: 0.4-2.5 mm² (21-13 AWG)

Key features

• Event types: An Ajax app defines the event types for the inputs of wired devices. The selected type determines the text of the alarm messages and events of the connected device, as well as the event codes transmitted to the NSL. A PRO or a user with administrator rights can configure the event type in an Ajax app.
• Fail-safe mode: If the module is offline, discharged, or has hardware problems, it automatically activates the connected devices.

------------------------------

Installation recommendations

This device is only suitable for indoor use.

------------------------------

Sabotage protection

• Sabotage alert: Notifications about attempts to detach the module from the surface or open the front cover.
• Protection against device spoofing: Device authentication
• Detection of connection loss: after 36 seconds

The detection time depends on the jeweler's settings.

• Input monitoring: Detection of loss of wired connection, short circuits and faults when the EOL, 2EOL or 3EOL connection is used.

Depending on the type of connection.

power supply

• Battery: 2 × CR123A (Pre-installed)
• Estimated battery life: up to 5 years

Housing

• Dimensions: 116 × 180 × 62 mm
• Weight: 547 g
• Operating temperature: from 0 °C to +50 °C
• Operating humidity: up to 80%
• Protection class: IP21C
• Flammability class: UL 94 V-0
• Color: Black, White