Product information
Description
The Jablotron JA-162PW (G) wireless PIR/microwave detector is a bidirectional wireless component for the JABLOTRON 100+. The combined PIR and microwave (MW) sensor
Recognition makes the product particularly reliable in terms of
False alarms. The motion detector works like a classic PIR detector, however, if movement is detected via PIR activation in a
When the monitored area is detected, microwave activation occurs and
confirms the previous PIR activation.
The JA-162 PW (G) features a grey lens with enhanced white light immunity, far exceeding the requirements defined by the standard (up to 10,000 lux). This lens helps reduce false alarms caused by factors such as car headlights, the setting sun, lightning, or reflective surfaces. False alarm immunity can be set to two levels: PIR and MW.
The JA-162PW is only compatible with the Jablotron control units JA-103KR and JA-107KR.
Details
- Power supply: 2x Lithium batteries 3V type CR123A (not included in the scope of delivery)
- Typical battery life: approx. 4 years (longest time in smartwatch mode, at 20°C)
- Communication band: 868.1 MHz, Jablotron protocol
- Low battery status: < 2.7 V
- Standby current consumption: 65 Ω
- Maximum current consumption: 50 mA
- Communication range: up to 300 m (open terrain)
- Maximum radio frequency power: 10 mW
- Dimensions (H x W x D): 150 x 63 x 40 mm
- Net weight: 125 g
- Recommended installation height: 2.2 to 2.5 m above the ground
- MW operating frequency: 24.125 GHz
- Maximum power of the MW radio frequency (ERP): 30 mW
- Detection angle/PIR detection range: 90°/12 m
- Detection angle/mechanical detection range: 80°/12 m
- Classification: Level 2, according to EN 50131-1
- Environment according to: EN 50131-1 II. General indoor areas
- Ambient temperatures: -10 °C to +40 °C
- Average operating humidity 75% RH, without condensation
- Corresponds: ETSI EN 300 220-1,-2, ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4, EN 50131-5-3, EN 50131-6
Scope of delivery
- 1x Wireless PIR Detector JA-162PW (G) grey lens
- Mounting hardware
Downloads
Description
The Jablotron JA-162PW (G) wireless PIR/microwave detector is a bidirectional wireless component for the JABLOTRON 100+. The combined PIR and microwave (MW) sensor
Recognition makes the product particularly reliable in terms of
False alarms. The motion detector works like a classic PIR detector, however, if movement is detected via PIR activation in a
When the monitored area is detected, microwave activation occurs and
confirms the previous PIR activation.
The JA-162 PW (G) features a grey lens with enhanced white light immunity, far exceeding the requirements defined by the standard (up to 10,000 lux). This lens helps reduce false alarms caused by factors such as car headlights, the setting sun, lightning, or reflective surfaces. False alarm immunity can be set to two levels: PIR and MW.
The JA-162PW is only compatible with the Jablotron control units JA-103KR and JA-107KR.
Details
- Power supply: 2x Lithium batteries 3V type CR123A (not included in the scope of delivery)
- Typical battery life: approx. 4 years (longest time in smartwatch mode, at 20°C)
- Communication band: 868.1 MHz, Jablotron protocol
- Low battery status: < 2.7 V
- Standby current consumption: 65 Ω
- Maximum current consumption: 50 mA
- Communication range: up to 300 m (open terrain)
- Maximum radio frequency power: 10 mW
- Dimensions (H x W x D): 150 x 63 x 40 mm
- Net weight: 125 g
- Recommended installation height: 2.2 to 2.5 m above the ground
- MW operating frequency: 24.125 GHz
- Maximum power of the MW radio frequency (ERP): 30 mW
- Detection angle/PIR detection range: 90°/12 m
- Detection angle/mechanical detection range: 80°/12 m
- Classification: Level 2, according to EN 50131-1
- Environment according to: EN 50131-1 II. General indoor areas
- Ambient temperatures: -10 °C to +40 °C
- Average operating humidity 75% RH, without condensation
- Corresponds: ETSI EN 300 220-1,-2, ETSI EN 300 440, EN 50130-4, EN 55032, EN 62368-1, EN 50581, EN 50131-1, EN 50131-2-4, EN 50131-5-3, EN 50131-6
Scope of delivery
- 1x Wireless PIR Detector JA-162PW (G) grey lens
- Mounting hardware
Downloads
Manufacturer
by
Jablotron
Jablotron Wireless PIR/MW Motion Detector JA-162PW (G) grey lens
- Regular price
- €147,90
- Sale price
- €147,90
- Regular price
-
€199,20
Series: Jablotron 100
Series: Jablotron 100
Couldn't load pickup availability
SKU: Product number: JA-162PW-G
Delivery time: 1-3 days
Free Shipping*
Information for corporate/business customers
Invoice without VAT
Business customers from Germany and other EU countries (excluding Austria) can have their goods invoiced without VAT. Simply provide your valid VAT identification number during the ordering process.
Order with VAT identification number
The easiest way to enter your VAT ID number is during the customer account creation process: Click here
Alternatively, you can access the shopping cart during the ordering process (either on the side or directly on the shopping cart page). There, enter your valid VAT identification number in the "VAT ID" field; this will automatically process your order tax-free.
Special conditions for large orders
Please contact us for large orders. We will promptly provide you with a customized offer with special conditions.
Learn more here
