Product information

Description

The AJAX "MotionCam" is a wireless motion detector with automatic photo capture when an alarm is triggered. It monitors an area of up to 12 m and masks animals weighing up to approximately 20 kg. Image data is transmitted to the control center (HUB 2) wirelessly and without Wi-Fi. The wireless camera detector is integrated into the "Ajax" alarm system via the proprietary "Jeweller" protocol.

Protection against manipulation and errors

The detector housing is protected against sabotage
Presence monitoring of the detector adjustable (12-300 s)
Encrypted radio transmission
Identification and prevention of jamming

High reliability

Automatic snapshot function when alarm is triggered
Sends a photo to smartphone / tablet after alarm is triggered
The function is guaranteed even in the event of a power failure
Three sensitivity levels for every situation
Intelligent signal processing ignores small animals up to 20 kg
2-way communication with the HUB 2 allows uncomplicated test mode and system adaptation

Easy installation

Convenient installation of the wireless motion detector using convenient mounting plates
Signal quality and detection range can be easily tested and adjusted
Easy login to the system by scanning the QR code
Unlike video surveillance systems, the wireless MotionCam detector is ready for use in just a few minutes
MotionCam detectors do not require WLAN (Wi-Fi) to transmit image data
Integration of Ajax wireless detectors into third-party systems possible (interface required)

Details

Dimensions (HxWxD): 135 x 70 x 60 mm
Application: Indoor
Resolution: max. 640 x 480 px
Battery life: up to 4 years
Operating voltage: 3 V
Operating temperature: +5 °C to +40 °C
Detection range: PIR up to 12 m
Detection angle: 88.5° horizontal/ 80° vertical
Sensitivity: three adjustable levels (low, medium, high)
Recommended installation height: 2.4 m
Color: white or black
Photos when alarm is triggered: up to 10 snapshots per alarm
Radio signal power: 20 mW
Radio protocol: Jeweler (868MHz)
Communication: wireless
Compatibility: only with HUB 2
Max. radio range: up to 1,200 m outdoors
Max. humidity: 80%
Tamper protection: yes
Sensor: PIR
Power supply: 2x lithium battery (CR123A)
Animal immunity: up to approx. 20 kg weight and up to 50 cm shoulder height

Scope of delivery

MotionCam
2x batteries CR123A
Mounting kit
Quick guide

Downloads

📄 Benutzerhandbuch

📄 Technisches Datenblatt

Description

The AJAX "MotionCam" is a wireless motion detector with automatic photo capture when an alarm is triggered. It monitors an area of up to 12 m and masks animals weighing up to approximately 20 kg. Image data is transmitted to the control center (HUB 2) wirelessly and without Wi-Fi. The wireless camera detector is integrated into the "Ajax" alarm system via the proprietary "Jeweller" protocol.

Protection against manipulation and errors

The detector housing is protected against sabotage
Presence monitoring of the detector adjustable (12-300 s)
Encrypted radio transmission
Identification and prevention of jamming

High reliability

Automatic snapshot function when alarm is triggered
Sends a photo to smartphone / tablet after alarm is triggered
The function is guaranteed even in the event of a power failure
Three sensitivity levels for every situation
Intelligent signal processing ignores small animals up to 20 kg
2-way communication with the HUB 2 allows uncomplicated test mode and system adaptation

Easy installation

Convenient installation of the wireless motion detector using convenient mounting plates
Signal quality and detection range can be easily tested and adjusted
Easy login to the system by scanning the QR code
Unlike video surveillance systems, the wireless MotionCam detector is ready for use in just a few minutes
MotionCam detectors do not require WLAN (Wi-Fi) to transmit image data
Integration of Ajax wireless detectors into third-party systems possible (interface required)

Details